1-855-888-4333    Service@emayltd.com
You are here: Home » Knowledge » How to Use a Finger Pulse Oximeter.

How to Use a Finger Pulse Oximeter.

Views:356     Author:Site Editor     Publish Time: 2020-03-20      Origin:Site

A pulse oximeter is a medical device that measures heart rate and the oxygen level in the blood, expressed as the percent of oxygen saturation. Pulse oximeters operate by shining light through the skin to the blood vessels below. These devices are routinely used in many health care settings and are available over the counter. A high oxygen saturation -- close to 100 percent -- indicates that the red blood cells are fully loaded with oxygen from the lungs.


Step 1

Turn on the pulse oximeter by firmly pressing the power button. The screen should light up almost instantly.

Step 2

Place the sensor -- the part that opens and closes like a clothespin -- on any finger, with the sensor screen above the fingernail. If the sensor doesn't have a screen, run the cable along the back of the finger or hand. Don't use the thumb because readings are less reliable than finger readings.

Step 3

Wait quietly while the pulse oximeter acquires a signal. This may take 10 seconds or more, depending on the device and the conditions. Excessive movement during measurement can decrease the accuracy of the result or may cause an error message.

Step 4

Look at the display to see the heart rate, usually indicated with a heart or pulsing light. The percent of oxygen saturation is typically indicated by the symbol "SpO2." Many devices also have a pulse tone that beeps in time with the heart rate.

Step 5

Leave the sensor on for continuous monitoring. The sensor can become uncomfortable or cause pressure sores if left on the finger too long. Check and/or move the sensor at least every two to four hours. If only a single measurement is required, remove the sensor and press the power button to turn off the device.


· To ensure proper function, read the manual for your specific pulse oximeter. Remove nail polish, especially dark colors, before placing the sensor on the finger. Place the sensor on the finger before turning on the pulse oximeter for a faster result. Pulse oximeters are less accurate if there is poor blood flow to the finger. This may occur if the person is cold, has very low blood pressure or is having a heart attack. Carbon monoxide -- due to smoke inhalation, carbon monoxide poisoning or heavy cigarette smoking -- results in falsely high pulse oximeter readings. Altitude may result in lower percent oxygen saturation due to the lower oxygen pressure in the air, particularly if you have recently arrived.


· A normal percent oxygen saturation reading is in the 95 to 100 percent range. In the event of a low oxygen saturation measurement, look for signs of respiratory distress. This includes shortness of breath, wheezing, difficulty breathing or a bluish discoloration of the face, lips or fingernails. Seek medical attention right away if the respiratory distress is a new or uncomfortable symptom. if it's getting worse or if the pulse oximeter measurement is below 90 percent. 

EMAY Bluetooth Pulse Oximeter is designed to monitor your overnight blood oxygen (SpO2) and pulse rate with second by second. Check out more:


30-DAY Money Back Guaranteed
100% FDA Approved
FREE SHIPPING:2-5 business days
1-YEAR Warranty


For promotion ,latest release and other updates, enter your email.


  Questions? Call us toll free:
   1-855-888-4333
 (Mon-Fri 8:00am-6:00pm PST)

Shop Now



Follow Us

Copyrights 2020 Emay (HK) Limited All rights reserved.Technology by leadong  Sitemap